Practice portal › Semiconductor Electronics › Zener Diode as a Voltage Regulator

The following diagram shows a zener diode as a voltage regulator. The zener diode is rated at V_z=5 V and the desired current in load is 5 mA. The unregulated voltage source can supply upto 25 V. Considering the zener diode can withstand four times of the load current, the value of resistor Rₛ (shown in circuit) should be ______ Ω. [Figure: unregulated input Vᵢₙ, series resistor Rₛ, then a Zener diode (reverse biased) across the output, in parallel with the load R_L; regulated output Vₒ across R_L.]

Asked in JEE Main 23rd Jan 1st Shift 2026 · Zener current and series resistance

Figure: Zener current and series resistance
Answer: 800

Step-by-step solution

Maximum Zener current =4×5=20 mA; load current =5 mA.

At the maximum input (25 V) the current through Rₛ is at most 20+5=25 mA.

Rₛ=(25-5)/(25×10⁻³)=800 Ω

Note: in the paper this was an MCQ with options 4000, 10, 100 and 1000 Ω, and the official key is 1000 Ω. The derivation gives exactly 800 Ω, confirmed against the published paper and solution; the official key is wrong. Shipped as a numerical-answer question with 800.

More Zener Diode as a Voltage Regulator questionsAll Zener Diode as a Voltage Regulator questions →

Reading this solution needs no sign-in. You only sign in to practise against the clock and keep your progress.

Practise this with a timer