Practice portal › Semiconductor Electronics › Zener Diode as a Voltage Regulator

In the following circuit, the reading of the ammeter will be (Take Zener breakdown voltage =4 V) [Figure: a 12 V cell and 100 Ω in series feed three parallel branches: a Zener diode (reverse biased), a voltmeter, and a 400 Ω resistor in series with an ammeter.]

Asked in JEE Main 7th April 1st Shift 2025 · Zener current and series resistance

Figure: Zener current and series resistance
Answer: (3) 10 mA

Step-by-step solution

Check the Zener: without it the load would get 12×(400)/(500)=9.6 V>4 V, so it breaks down and holds 4 V.

Ammeter (load) current: 4/(400)=10 mA

Why the other options are wrong

More Zener Diode as a Voltage Regulator questionsAll Zener Diode as a Voltage Regulator questions →

Reading this solution needs no sign-in. You only sign in to practise against the clock and keep your progress.

Practise this with a timer