Practice portal › Semiconductor Electronics › Diode as a Rectifier

A full wave rectifier circuit with diodes D₁ and D₂ is shown in the figure. If the input supply voltage is Vᵢₙ=220 sin(100π t) volt, then at t=15 ms

Asked in NEET 2025 · Rectifiers and filters

Figure: Rectifiers and filters
Answer: (4) D₁ is reverse biased, D₂ is forward biased

Step-by-step solution

Idea: find where t=15 ms falls in the cycle, then use the fact that the two secondary halves are always of opposite sign.

ω=100π, so T=(2π)/ω=(2π)/(100π)=0.02 s =20 ms.

t=15 ms is (3T)/4, which lies in the second half of the cycle, where sin is negative.

During that half the upper end of the secondary is negative, so D₁ is reverse biased, and the lower end is positive, so D₂ is forward biased.

Current reaches the load through D₂.

Why the other options are wrong

More Diode as a Rectifier questionsAll Diode as a Rectifier questions →

Reading this solution needs no sign-in. You only sign in to practise against the clock and keep your progress.

Practise this with a timer