Practice portal › Semiconductor Electronics › Semiconductor Diode and Diode Circuits

Ge and Si diodes start conducting at 0.3 V and 0.7 V respectively. In the following figure if Ge diode connection are reversed, the value of V₀ changes by (assume that the Ge diode has large breakdown voltage) [Figure: a 12 V cell drives current through a Ge diode and a Si diode connected in parallel (both forward biased), then through 5 kΩ to ground. V₀ is taken at the top of the 5 kΩ.]

Asked in JEE Main 9th Jan 2nd Shift 2019 · Circuits with diodes

Figure: Circuits with diodes
Answer: (1) 0.4 V

Step-by-step solution

Before: both diodes in parallel are forward biased; the Ge diode turns on first and clamps the drop at 0.3 V.

V₀=12-0.3=11.7 V

After reversing Ge, only the Si diode conducts: V₀=12-0.7=11.3 V

Change =0.4 V

Why the other options are wrong

More Semiconductor Diode and Diode Circuits questionsAll Semiconductor Diode and Diode Circuits questions →

Reading this solution needs no sign-in. You only sign in to practise against the clock and keep your progress.

Practise this with a timer