Practice portal › Laws of Motion › Dynamics of Circular Motion

Concrete mixture is made by mixing cement, stone and sand in a rotating cylindrical drum. If the drum rotates too fast, the ingredients remain stuck to the wall of the drum and proper mixing of ingredients does not take place. The maximum rotational speed of the drum in revolutions per minute (rpm) to ensure proper mixing is close to (Take the radius of the drum to be 1.25 m and its axle to be horizontal)
[Take g=10 m s⁻²]

Asked in JEE Main Online 2016 · Banked roads and the conical pendulum

Answer: (1) 27.0

Step-by-step solution

Idea: the ingredients fall away from the wall at the top of the drum only if gravity is more than enough to hold them in their circle there. The critical case is ω²R=g.

At the top, gravity and the wall both point downward, towards the axis:

mg+N=mω²R.

The material leaves the wall when N falls to zero, so mixing happens for

ω²R≤ g, i.e. ω≤√g/R=√(10)/(1.25)=√8=2.83 rad/s.

In revolutions per minute,

n=(2.83×60)/(2π)=(169.7)/(6.283)≈27 rpm.

This is the same criterion as the rotor and the bucket of water swung overhead: spin any faster and the contents never leave the wall, which for a mixer means nothing gets mixed.

Why the other options are wrong

More Dynamics of Circular Motion questionsAll Dynamics of Circular Motion questions →

Reading this solution needs no sign-in. You only sign in to practise against the clock and keep your progress.

Practise this with a timer